Portable vulcanizer(spot vulcanizer)

CGXBJ (high voltage) parameter sheet
 CGXBJ (high voltage) parameter sheet
 

Model

XBPJ-1

XBPJ-2

XBJ-3

Types of repairing transport belt	Canvas, nylon, Belt with wire rope for transporting	Canvas, nylon, Belt with wire rope for transporting	Canvas, nylon, Belt with wire rope for transporting
Repair transport belt width (mm)	650—2200	650—2200	650—2200
The maximum cut size of repairing belt (mm)	250×250	250×600	250×900
Electric heating-Dimension (mm)	350×350	350×700	350×1000
Vulcanizing temperature as Repairing at 145 ℃	Adjustable 0-200 ℃	Adjustable 0-200 ℃	Adjustable 0-200 ℃
Total power (Kw)	1.91	1.91	1.91
Voltage (V)	380	380	380
Temperature difference of working Electrical plate surface (℃)	±3	±3	±3
Sulfide pressure (MPa)	0.8	0.8	0.8
Time of heating from normal temperature to curing temperature (mins)	30	30	30

Installation:
1.Please move the repair machine to the repair location;
2.Please fill the raw rubber to the broken part. (The filling raw rubber part in the vulcanization technics can be taken as reference, or our technical workers demonstrate it as adjusting.)
3. Please put the down machine frame rightly aiming at the broken part, meanwhile, put the hydraulic pressure plate and the lower heating plate under the broken part.
4.Please put the upper heating plate on the broken part, and lay up the heat insulation plate, and then install the machine frame.( ※remark: CGXBJ low voltage series machines are integrative machines.
5.Install the screw and screw down.
6.Please connect power with electrical control box by primary cable, and separately connect upper heating plate with electrical control box, and the lower heating plate with electrical control box by secondary cable, meanwhile, please separately connect upper heating plate and electrical control box, lower heating plate and electrical control box with temperature-measure components. Please pay attention to the corresponding electrical control box as connection. 7.Please connect hydraulic plate and pressure-test pump with high pressure tube, and then start the electrical control box, meanwhile, and affuse water to the condition of vulcanizing pressure.